LV-671Z 
 Mini-ITX onboard Intel Celeron M 600MHz CPU Embedded Motherboard
Mini-ITX Celeron M Embedded Motherboard (170 x 170 mm)
Onboard Intel Celeron M 600MHz  @400 MHz FSB uFCBGA CPU 
Intel 852GM and ICH4 Chipset
1 GB DDR 266  SDRAM 
Intel 852GM GMCH Built-in Extreme Graphics with 256-bit 3D Engine
Intel Dynamic Video Memory up to 64 M Bytes / 40-pin LVDS LCD connector
Onboard Intel 82540EM Gigabit Ethernet controller
Onboard PCMCIA Type I/II slot
Onboard Intel ICH4 Hi-Speed USB 2.0 Interface
Onboard 5.1-Channel
 

view larger image
 

-
 
Overview
 
-
 
Feature
 
-
 
Specification
 
-
 
Product Image
 
-
 
Ordering Guide
 
-
 
Datasheet (PDF format)
 
-
 
Technical Document

  

Overview

COMMELL LV-671Z is an all-in-one industrial compact Intel Celeron M 600MHz level Mini-ITX platform  based on Intel 82852GM and 82801DB Chipset, which offers a highly integrated low power, high performance chipset solution that has been optimized to onboard Intel® Celeron® M 600MHz  @400MHz FSB processor, high speed DDR memory, integrated graphics controller with Intel Extreme Graphics 2 dual independent displays , The integrated display controller comes with up to 64 MB of dynamic video memory allocation and Single- or Dual-channel LVDS panel support up to SXGA+ panel resolution.

The LV-671Z comes with floppy, PS/2 Keyboard and Mouse, 2 x RS232C, Ultra ATA 100 EIDE and IrDA interface on-board, Networking is provided by Intel 82540EM Gigabit Ethernet. Six USB ports and 5.1 channel Audio are also integrated. A Mini-PCI slot is available for system expansion that can hold all types of Mini-PCI modules, for more feature extension such as Centrino-like wireless LAN, DES, modem or capture card. To Meet the requirement of different display interface, LV-671Z provides the optional Mini-AGP slot to use Mini-AGP add-on card. Additionally, LV-671Z is also equipped with PCMCIA and CompactFlash Interface for easily using any communication and memory card.   

The single DC supply is another important feature for embedded system integrator.  COMMELL LV-671Z is requiring 12VDC  or  19VDC only, Moreover, The board features a protective design to prevent when input voltage rises up to unexpectedly voltage.

BackToTop

 
Key Feature

  • Ultra compact  MiniITX form factor at 170 x 170mm (W x L) of dimension

  • Onboard Intel  Celeron M 600MHz  @400MHz FSB uFCBGA CPU

  • Intel 852GM GMCH built-in Intel Extreme Graphics 2 with 266 MHz VGA core, 256-bit 3D/2D graphic engine and Intel Dynamic Video Memory Technology up to 64 MB shared with system memory

  • High memory capacity with 1 GB DDR 266 SDRAM

  • Onboard single / dual channel 18-/24-bit LVDS interface for TFT LCD

  • Mini-AGP socket supports DVI / HDTV (Intel 852GM basis) and 4xAGP VGA add-in module (Intel 852GM basis)

  • PCI, Mini-PCI, and PCMCIA type-III PC card interface

  • Integrated Intel 82540EM Gigabit Ethernet interface

  • One 40-pin and one 44-pin IDE port for both of desktop and slim type ATAPI devices

  • Integrated AC97 3D 5.1-Channel & S/P DIF audio interface

  • IDE-based DiskOnModule and CompactFlash embedded flash disk interface

  • External DC jack with +12V or +19V DC input (with external AC/DC adapter)

BackToTop

 
Specification

 

 
Form Factor
 
Mini-ITX form factor at 170 x 170 mm
 
CPU
 
Onboard Intel Celeron M 600Mhz
@ 400 MHz FSB uFCBGA CPU 
Memory
 
One 184-pin DIMM socket
Support up to 1 GBytes DDR 266 SDRAM
 
Chipset
 
 82852GM GMCH and 82801DB ICH4
 
Watchdog Timer
 
Programmable generates NMI or system reset watchdog timer
with 1 to 255 sec. / min. of time out value
 
Power Management
 
ACPI 1.0 compliant, supports power saving mode with ATX PSU
 
Real Time Clock
 
Intel ICH4 built-in RTC with onboard lithium battery
 
PCI Enhanced IDE
 
Dual UltraATA/100 bus master IDE channels
Support up to 4 ATAPI devices on 40-/44-pin IDE ports
Jumper selectable Vcc power output on 40-pin IDE1
for power cable free DiskOnModule flash disk
 
VGA Interface
 
 Intel 852GM GMCH built-in Intel Extreme Graphics 2
with 266 MHz VGA core and 256-bit 3D engine
Intel Dynamic Video Memory up to 64 MB shared with system
External DB15 female connector on rear I/O panel
 
LVDS Interface
 
Intel 852GM GMCH built-in Intel Extreme Graphics 2
with onboard Chrontel CH7017A built-in LVDS transmitter
Resolution up to 1400 x 1050 SXGA+
Support 24-bit Dual channel LVDS TFT LCD
Onboard 20-pin Hirose DF13-20DP-1.25V connector
 
TV-out Interface
(Optional)
 
 Intel 852GM GMCH built-in Intel Extreme Graphics 2
with MA-SDTV Mini-AGP add on card
 
LAN Interface
 
Intel 82540EM Gigabit Mbps Ethernet interface 
Audio Interface
 
Intel ICH4 with onboard ACL650 AC97 3D audio codec
5.1 channel, line-in, line-out, Mic-in, CD-in and S/P DIF interface
 
PCMCIA Interface
 
 
PCI RICOH R5C475II PCMCIA PC card / CardBus controller
Comply with PCMCIA V.2.10 and JEIDA 4.2 Specification
16-/32-bit data bus, support hot swap function
Mix and Match 5V/3.3V PC Card, 16/32 Card, 3.3 CardBus Card
One PCMCIA type-I/II slot
 
Hi-Speed USB 2.0
 
Intel ICH4 chipset built-in Hi-Speed USB 2.0 interface
with 480 Mbps of data transfer rate and bootable setting in BIOS 
Multi-I/O Port
 
2 x COM port, 1 x parallel, 6 x USB 2.0, 1 x IrDA, 1 x FDD, 
1 x PS/2 keyboard and mouse port.
 
External I/O Port
 
Back panel : PS/2 keyboard and mouse port, VGA, parallel port, 
Dual COM port, Speaker-out, SPDIF, LAN, Dual USB2.0, 
DC power input.
Front panel : MIC, Line in & earphone or Central/Base, 
Rear & Front audio outputs and 2 x Dual USB port
 
Solid State Disk
 
 
CompactFlash Card
CompactFlash socket supports CompactFlash Card (CFC)
Support PIO mode 4 up to 16.6 MBytes of data transfer rate
Default setting as secondary IDE port at master mode
Bootable, driver free IDE-based flash disk
Flash memory capacity up to 1 G Bytes (and beyond)
DiskOnModule Flash Disk
IDE-based, bootable, driver free DiskOnModule flash disk
PIO mode 4 with 16.6 Mbps of data transfer rate
Flash memory capacity up to 1 GB ytes (and beyond)
 
Expansive Slot
 
One 32-bit PCI slot supports 2 bus master PCI via riser card, 
and Mini-PCI or  Mini-AGP port can be used optionally.
 
Environment
 
   Power Requirement: Single 19V 6A DC input or 12V 10A DC input Board 
   Dimension (W x L): 170mm x 170mm with standard Mini-ITX form factor
   Operation Temperature: 0 ~ 60oC (32 ~ 140oF)

Download Datasheet @ PDF format

BackToTop

 
Ordering Guide
 

LV-671ZMP

Mini-ITX onboard Intel Celeron M 600MHz @400MHz FSB

CPU with Intel 852GM GMCH and ICH4 Chipset, DDR 266 SDRAM

Intel  Extreme Graphic 3D VGA, 24-bit Dual Channel LVDS interface

Intel Gigabit LAN, Hi-Speed USB 2.0, 5.1-CH & S/P DIF Audio,

PCMCIA, Compact Flash and Mini-PCI socket

LV-671ZMA

 
Same as above but change Mini PCI to Mini AGP ( Nonsupport  MA-ATI)

LV-671ZNSMP

Same as above LV-671ZMP but without PCMCIA and CF interface

LV-671ZNSMA Same as above LV-671ZMA but without PCMCIA and CF interface( Nonsupport  MA-ATI)

LV-671Z8MP

Same as LV-671ZMP but change CPU to Celeron M 800 MHz 

LV-671Z8NSMP

Same as LV-671ZNSMP but change CPU to Celeron M 800 MHz 

LV-671CM6MP Same as LV-671ZMP but change CPU to Celeron M 600 MHz, 512K L2 cache 
LV-671CM6MA Same as LV-671ZMA but change CPU to Celeron M 600 MHz, 512K L2 cache 

SPD-080-12A

 
AC-DC Adapter with 12V, 80W Mini DIN output

BackToTop

[Single Board Computer Index]